IGARO Front Light Power Lead (d1pow01)
|Description||This power lead is ideal for bicycles fitted with a dynamo powered front light featuring 2.6mm spade connectors. Using this lead you can connect an Igaro D1 to the power input of the front light rather than to the dynamo hub. With a dynamo light this is generally preferred as the wiring is tidier and only one wire needs to travel down the fork to the dynamo hub.
An Igaro D1 featuring a power socket.
A front light featuring 2.6mm spade connectors.
Where spade connectors are built into the light unit they must have room around them to allow for fitting the piggyback connectors on this lead.
B&M Eyro, Avy, Cyo, Eyc, Lyt
Schmidt - All Models
Supernova - All Models
AXA - All Models
This small lead comes with piggyback connectors. Remove the connectors from the light's AC in (if already fitted) and connect them onto the piggyback tabs. Connect the piggyback connectors to the light (either way around).
As with any product, specification is subject to change without prior notification. You are advised to confirm current specification before buying.